One litre of top coat is sufficient to give you 2 coats, it did on mine and I also painted the cockpit floor and stowage lockers.

Roger
59725

If anyone is going to use International two-pack polyurethane then read this article for lots of excellent tips to get the best finish.

http://www.ybw.com/ybw/reprints/pbo/topcoat.html

Roger
59725

Way too late to answer the original question - but I wanted to establish the area myself - an epoxy coating process is about to begin on my rennovation project.

Based on some measurements I took last night my estimate is 5.8 metres squared. (Give or take about plus or minus 10% I reckon). This being for all the exterior hull surfaces including the transoms.

Hope that might help somebody in the future!

Neil



Edited by - Neil R on 25 January 2008 10:57:59

Edited by - Neil R on 25 January 2008 10:59:15

Does anyone know the total area in square feet (or sqauer meters) of the Mirror dinghy hull (including fore and aft transoms)?
I am trying to find out the size of the paintable surface.
-Richard Larson (70369/26688)